PFM Repair Kit

La dernière génération de kit métallo-céramique utilisant First Coat, une résine sans solvant qui adhère fortement à la céramique et au métal. Les tests montrent un meilleur résultat que le Silane.

Kit multifonction contenant :

Embrace™ First-Coat

Unique one-step resin primer bonds chemically and mechanically to prepared ceramic and metal. Contains no solvents.

Embrace™ Esthetic Opaquer

A thin film spreads smoothly and masks out discolored tooth and ceramic surfaces. Light cures in 20 seconds.

Embrace™ Seal-n-Shine™

Polishes, penetrates and seals leaving a glaze-like finish on restored teeth.

Kool-Dam™

Protège les tissus mous, les dents et les surfaces de réparation. Reste souple.

Porcelain Etch Gel

Gel à l’acide fluorhydrique (9,6 %) pour le mordançage des surfaces en céramique.

Application

Fig. 1: Shows porcelain fractured off the crown on the lower left first bicuspid (#21).

Fig. 2:. Kool-Dam is placed on the the gingiva and light cured to protect the soft tissue.

Fig. 3: Porcelain Etch Gel is placed on the porcelain surface for one minute, removed with vacuum,
rinsed and dried. Abrade any exposed metal with a fine diamond.

Fig. 4: Apply First-Coat to etched porcelain and abraded metal surfaces.

Fig. 5: Light cure First-Coat.

Fig. 6: Embrace Opaquer, off-white shade, is placed on the exposed metal and light cured.

Fig. 7: The crown is incrementally restored with composite resin.

Fig. 8: After contouring and finishing the restoration, etch for 10 seconds and apply Seal-n-Shine, which seals the margins and provides a high lustre finish.

Fig. 9: Seal-n-Shine is ight cured.

Fig. 10: The final result.

Photography courtesy of Dr. Robert A. Lowe